mika2006
5th June 2007, 14:44
Bonjour j'aimerais juste avoir l'info est annulé le warning
donc la commande est :
[root@localhost plugins]# ./check_snmp_process.pl -H 192.168.221.154 -C public -n ssrefox.exe
No process matching ssrefox.exe found : CRITICAL
[root@localhost plugins]#
[root@localhost plugins]# ./check_snmp_process.pl -H 192.168.221.154 -C public -n refox.exe
1 process matching refox.exe (> 0)
Donc la commande m'indiqie le nombre de processus refox
mais mon probléme c'est que je neveut pas d'alerte je veux uniquement l'informaton
comment désactiver l'alerte, le warning svp?
en regardant le fichier de conf i ly a sa:
[root@localhost plugins]# ./check_snmp_process.pl -h
SNMP Process Monitor for Nagios version 1.4
GPL licence, (c)2004-2006 Patrick Proy
Usage: ./check_snmp_process.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd) [-p <port>] -n <name> [-w <min_proc>[,<max_proc>] -c <min_proc>[,max_proc] ] [-m<warn Mb>,<crit Mb> -a -u<warn %>,<crit%> ] [-t <timeout>] [-o <octet_length>] [-f ] [-r] [-V] [-g]
-v, --verbose
print extra debugging information (and lists all storages)
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies SNMP v1 or v2c with option)
-l, --login=LOGIN ; -x, --passwd=PASSWD, -2, --v2c
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-2 : use snmp v2c
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-p, --port=PORT
SNMP port (Default 161)
-n, --name=NAME
Name of the process (regexp)
No trailing slash !
-r, --noregexp
Do not use regexp to match NAME in description OID
-f, --fullpath
Use full path name instead of process name
(Windows doesn't provide full path name)
-w, --warn=MIN[,MAX]
Number of process that will cause a warning
-1 for no warning, MAX must be >0. Ex : -w-1,50
-c, --critical=MIN[,MAX]
number of process that will cause an error (
-1 for no critical, MAX must be >0. Ex : -c-1,50
Notes on warning and critical :
with the following options : -w m1,x1 -c m2,x2
you must have : m2 <= m1 < x1 <= x2
you can omit x1 or x2 or both
-m, --memory=WARN,CRIT
checks memory usage (default max of all process)
values are warning and critical values in Mb
-a, --average
makes an average of memory used by process instead of max
-u, --cpu=WARN,CRIT
checks cpu usage of all process
values are warning and critical values in % of CPU usage
if more than one CPU, value can be > 100% : 100%=1 CPU
-g, --getall
In some cases, it is necessary to get all data at once because
process die very frequently.
This option eats bandwidth an cpu (for remote host) at breakfast.
-o, --octetlength=INTEGER
max-size of the SNMP message, usefull in case of Too Long responses.
Be carefull with network filters. Range 484 - 65535, default are
usually 1472,1452,1460 or 1440.
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
Note :
CPU usage is in % of one cpu, so maximum can be 100% * number of CPU
example :
Browse process list : <script> -C <community> -H <host> -n <anything> -v
the -n option allows regexp in perl format :
All process of /opt/soft/bin : -n /opt/soft/bin/ -f
All 'named' process : -n named
You have new mail in /var/spool/mail/root
donc si je suis ce qu'il y a d'écrits
je dois faire cette commande -w-1,50
donc sa veut dire pas de warning
mais sa me met ce message :
LOl je viens de toruver comment sa marche
sa me fais mal au coeur de toute effécé alors je le laisse
[root@localhost plugins]# ./check_snmp_process.pl -H 192.168.221.154 -C public -n ssrefox.exe -c-1,50 -w-1,50
No process matching ssrefox.exe found : YOU told me it was : OK
donc merci à vous ;)
donc la commande est :
[root@localhost plugins]# ./check_snmp_process.pl -H 192.168.221.154 -C public -n ssrefox.exe
No process matching ssrefox.exe found : CRITICAL
[root@localhost plugins]#
[root@localhost plugins]# ./check_snmp_process.pl -H 192.168.221.154 -C public -n refox.exe
1 process matching refox.exe (> 0)
Donc la commande m'indiqie le nombre de processus refox
mais mon probléme c'est que je neveut pas d'alerte je veux uniquement l'informaton
comment désactiver l'alerte, le warning svp?
en regardant le fichier de conf i ly a sa:
[root@localhost plugins]# ./check_snmp_process.pl -h
SNMP Process Monitor for Nagios version 1.4
GPL licence, (c)2004-2006 Patrick Proy
Usage: ./check_snmp_process.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd) [-p <port>] -n <name> [-w <min_proc>[,<max_proc>] -c <min_proc>[,max_proc] ] [-m<warn Mb>,<crit Mb> -a -u<warn %>,<crit%> ] [-t <timeout>] [-o <octet_length>] [-f ] [-r] [-V] [-g]
-v, --verbose
print extra debugging information (and lists all storages)
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies SNMP v1 or v2c with option)
-l, --login=LOGIN ; -x, --passwd=PASSWD, -2, --v2c
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-2 : use snmp v2c
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-p, --port=PORT
SNMP port (Default 161)
-n, --name=NAME
Name of the process (regexp)
No trailing slash !
-r, --noregexp
Do not use regexp to match NAME in description OID
-f, --fullpath
Use full path name instead of process name
(Windows doesn't provide full path name)
-w, --warn=MIN[,MAX]
Number of process that will cause a warning
-1 for no warning, MAX must be >0. Ex : -w-1,50
-c, --critical=MIN[,MAX]
number of process that will cause an error (
-1 for no critical, MAX must be >0. Ex : -c-1,50
Notes on warning and critical :
with the following options : -w m1,x1 -c m2,x2
you must have : m2 <= m1 < x1 <= x2
you can omit x1 or x2 or both
-m, --memory=WARN,CRIT
checks memory usage (default max of all process)
values are warning and critical values in Mb
-a, --average
makes an average of memory used by process instead of max
-u, --cpu=WARN,CRIT
checks cpu usage of all process
values are warning and critical values in % of CPU usage
if more than one CPU, value can be > 100% : 100%=1 CPU
-g, --getall
In some cases, it is necessary to get all data at once because
process die very frequently.
This option eats bandwidth an cpu (for remote host) at breakfast.
-o, --octetlength=INTEGER
max-size of the SNMP message, usefull in case of Too Long responses.
Be carefull with network filters. Range 484 - 65535, default are
usually 1472,1452,1460 or 1440.
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
Note :
CPU usage is in % of one cpu, so maximum can be 100% * number of CPU
example :
Browse process list : <script> -C <community> -H <host> -n <anything> -v
the -n option allows regexp in perl format :
All process of /opt/soft/bin : -n /opt/soft/bin/ -f
All 'named' process : -n named
You have new mail in /var/spool/mail/root
donc si je suis ce qu'il y a d'écrits
je dois faire cette commande -w-1,50
donc sa veut dire pas de warning
mais sa me met ce message :
LOl je viens de toruver comment sa marche
sa me fais mal au coeur de toute effécé alors je le laisse
[root@localhost plugins]# ./check_snmp_process.pl -H 192.168.221.154 -C public -n ssrefox.exe -c-1,50 -w-1,50
No process matching ssrefox.exe found : YOU told me it was : OK
donc merci à vous ;)