problems with

[stevec]

Hi,

Newbie here, please bear with me... Centreon 2.0.2

I've just installed Centreon as part of the latest FAN iso. It is working with regards to monitoring itself. However, I have problems with the service plugins for the other two linux servers (ubuntu) I have added.

on the Monitoring Services page, the diskspace plugins have errors such as:

ERROR: hrStorageDescr Table : No response from remote host '192.168.1.11'.

and the load services has:

UNKNOWN: No response from remote host '192.168.1.11'.

Whereas the ping services is OK.

Now, it looks like a standard SNMP firewalling or hosts.allow issue but if I log onto the centreon box and run an snmpwalk command, I get:

snmpwalk -v2c -c mycommunity 192.168.1.11 hrStorageDescr
HOST-RESOURCES-MIB::hrStorageDescr.1 = STRING: Memory Buffers
HOST-RESOURCES-MIB::hrStorageDescr.2 = STRING: Real Memory
HOST-RESOURCES-MIB::hrStorageDescr.3 = STRING: Swap Space
HOST-RESOURCES-MIB::hrStorageDescr.4 = STRING: /
HOST-RESOURCES-MIB::hrStorageDescr.5 = STRING: /sys
HOST-RESOURCES-MIB::hrStorageDescr.6 = STRING: /proc/bus/usb
HOST-RESOURCES-MIB::hrStorageDescr.7 = STRING: /mnt/windows

Now, the community used above is the same a per the hosts settings - as is the version. So it seems I can run the request manually but something is going wrong with the call centreon.

I ran debug and this seems to correlate to the issue:

[1265663192.534685] [064.1] [pid=14542] Making callbacks (type 9)...
[1265663192.534736] [001.0] [pid=14542] process_macros()
[1265663192.534757] [2048.1] [pid=14542] **** BEGIN MACRO PROCESSING ***********
[1265663192.534776] [2048.1] [pid=14542] Processing: 'INITIAL SERVICE STATE: mousehold;/;$SERVICESTATE$;$SERVICESTATETYPE$;$SERVICEATTEMPT$;ERROR: hrStorageDescr Table : No response from remote host '192.168.1.11'.
'
[1265663192.534818] [2048.1] [pid=14542]   Done.  Final output: 'INITIAL SERVICE STATE: mousehold;/;UNKNOWN;HARD;3;ERROR: hrStorageDescr Table : No response from remote host '192.168.1.11'.
'
[1265663192.534837] [2048.1] [pid=14542] **** END MACRO PROCESSING *************

Any thoughts I where I can look from here?

Thanks