check_graph plugins not working

[Zby Member Find all posts View Profile Close Zby]

I am using an Oreon 1.3B1, in conjunction with Nagios 2.3.1 on a Suse 10.1 (used the RPM packages from nagiosexchange). Everyhting is working now or seems to, except the graphs...

So, when I try one of the check_grap_* plugin, ex: perl ./check_graph_ping.pl -H addr -g -S 1212
I receive this error message back: "Undefined subroutine &RRDs::create called at /usr/lib/nagios/plugins/oreon.pm line 98."

How can I check I am using the right RRDs.pm? (test the .pm and config)? Or simple what do I wrong...??? :cry:

Thx in advance, Zby-)

[julio Administrator Find all posts View Profile Close julio]

Hi,

install perl-rrdtool

[Zby Member Find all posts View Profile Close Zby]

It is done ... I think ... Otherwise I would have received this RRDs.pm not found in @INC, no?

Merci,
Zby-)

[wistof Module Contributor Find all posts View Profile Close wistof]

Hello

in your oreon.pm

line 34 :

use lib qw(@[email protected] ../lib/perl);

be sure that @[email protected] is the directory where is your RRDs.pm, like
/usr/lib/perl5 (for example)

[Zby Member Find all posts View Profile Close Zby]

Wistof, Julio,

Thanks a lot for your help, it seems my Oreon setup is working a lot better now... :lol: I have changed to /usr/lib/perl5/vendor_perl/5.8.8 instead of /usr/lib/perl5/vendor_perl/5.8.8/Log/Log4perl/Appender where I originally found RRDs.pm...a little bit alone maybe?)

But still one stupid question. Now that Oreon generates his *.rrd in the /usr/local/oreon/rrd directory, how are they displayed? The Oreon Views are desperatly empty (No host, No service)! :evil:

Once again, I request your help... Merci d'avance, Zby-)

[julio Administrator Find all posts View Profile Close julio]

hosts and services will be diplayed only when rrd database will be create in /usr/local/oreon/rrd/..

Are you using oreon plugins ? (check_graph...)

[Zby Member Find all posts View Profile Close Zby]

Julio,

I observe .rrd files created in the /usr/local/oreon/rrd/ directory, for your info, I tried check_graph_ping. My question where will I find them back in the GUI? I have a 1.rrd in the dir. ...

Thx, Zby-)

[voodooo Junior Member Find all posts View Profile Close voodooo]

Hi there,

I can't graph anything to, but my thing is with the scripts:

bash-2.05# ./check_graph_ping.pl -H 192.168.40.100 -w 80 -c 90
Use of uninitialized value in pattern match (m//) at check_graph_ping.pl line 141.
Use of uninitialized value in split at check_graph_ping.pl line 145.
Use of uninitialized value in split at check_graph_ping.pl line 146.
Use of uninitialized value in numeric eq (==) at check_graph_ping.pl line 156.
Use of uninitialized value in concatenation (.) or string at check_graph_ping.pl line 161.
GPING OK -

Everything is working ok with nagios and oreon.
Anyone ?
Tks in advance

[DonKiShoot Senior Member Find all posts View Profile Close DonKiShoot]

LOCAL bug i think !

LANG="fr_FR.UTF-8" may help you but it is not a solution :cry:

check_graph_ping use the command ping and i think that the command output differs between computer who use differente local language.

[DonKiShoot Senior Member Find all posts View Profile Close DonKiShoot]

Try to put this on top of your check_graph_ping.pl :

use POSIX qw(locale_h);
setlocale(LC_CTYPE, "fr_FR");

That'all ...

# Cette fonctionnalité n'existait pas avant Perl 5.004
require 5.004;

# Import des outils de manipulation du "locale"
# depuis le module POSIX.
# Cette exemple utilise : setlocale -- l'appel de fonctio
# LC_CTYPE -- expliqué plus bas
use POSIX qw(locale_h);

# demande et sauvegarde le "locale" initial
$old_locale = setlocale(LC_CTYPE);

setlocale(LC_CTYPE, "fr_CA.ISO8859-1");
# LC_CTYPE est maintenant dans le
# "locale" "French, Canada, codeset ISO 8859-1"

setlocale(LC_CTYPE, "");
# LC_CTYPE revient ŕ sa valeur par défaut définie par
# les variables d'environnement LC_ALL/LC_CTYPE/LANG
# Voir plus bas pour la documentation

# restaure le "locale" initial
setlocale(LC_CTYPE, $old_locale);

[voodooo Junior Member Find all posts View Profile Close voodooo]

So you think the problem is the ping's output, makes sense cause i'm using solaris

Solaris:

bash-2.05$ uname -a
SunOS 5.9 Generic_117171-12 sun4u sparc SUNW,Ultra-5_10

bash-2.05$ which ping
/usr/sbin/ping

bash-2.05$ ping 192.168.40.100
192.168.40.100 is alive

bash-2.05$ ping -I 1 192.168.40.100
PING 192.168.40.100: 56 data bytes
64 bytes from holmes (192.168.40.100): icmp_seq=0. time=2. ms
64 bytes from holmes (192.168.40.100): icmp_seq=1. time=0. ms
64 bytes from holmes (192.168.40.100): icmp_seq=2. time=2. ms
----192.168.40.100 PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (ms)  min/avg/max = 0/1/2

Linux:

[[email protected]]# uname -a
Linux 2.6.9-34.ELsmp #1 SMP i686 i686 i386 GNU/Linux

[[email protected]]# which ping
/bin/ping

[[email protected]# ping 192.168.40.100
PING 192.168.40.100 (192.168.40.100) 56(84) bytes of data.
64 bytes from 192.168.40.100: icmp_seq=0 ttl=254 time=7.17 ms
64 bytes from 192.168.40.100: icmp_seq=1 ttl=254 time=1.40 ms
64 bytes from 192.168.40.100: icmp_seq=2 ttl=254 time=0.481 ms
--- 192.168.40.100 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 0.481/3.019/7.178/2.964 ms, pipe 2

Thanks for the help.
HS

[DonKiShoot Senior Member Find all posts View Profile Close DonKiShoot]

Yes this output are very different

You must modify the parssing code if you want to use this script however.

[voodooo Junior Member Find all posts View Profile Close voodooo]

Hello again :|

I have re-installed nagios and oreon on a linux box, now when i run the graph scripts:

./check_graph_ping.pl
Can't locate Config/IniFiles.pm in @INC (@INC contains:.......
at /home/nagios/libexec/oreon.pm line 27.
BEGIN failed--compilation aborted at /home/nagios/libexec/oreon.pm line 27.
Compilation failed in require at ./check_graph_ping.pl line 32.
BEGIN failed--compilation aborted at ./check_graph_ping.pl line 32.

I have generated the oreon.pm in options > plugins, and all the config files with oreon. What's whrong ?

tks, HS

[Menno Member Find all posts View Profile Close Menno]

./check_graph_ping.pl
Can't locate Config/IniFiles.pm in @INC (@INC contains:.......
at /home/nagios/libexec/oreon.pm line 27.

Maybe you forgot to install the perl module?
perl -MCPAN -e shell
cpan> install Config::IniFiles

Regards
Menno

[voodooo Junior Member Find all posts View Profile Close voodooo]

Yes, that's it tks.
I was working with diferent verssions of scripts:

check_graph_ping (nagios-plugins 1.3.0) 1.0
check_graph_ping (nagios-plugins 1.4.3) 1.2