Announcement

Collapse
No announcement yet.

Installation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Installation

    :mad: Est-il possible d'installer nagios2.5 telecharger depuis oreon-project sans erreur.
    C'est à dire que même en suivant toutes les instruction des installes, il y a quand même des erreur.
    merci de me donner une documentation qui serai installer nagios2.5 sans erreur

  • #2
    T'as quelle distrib?? Si tu renseigne bien tout, y'a pas d'erreur...
    Oreon 1.4
    Nagios 2.9
    RRDTool 1.2.18

    Comment


    • #3
      Quelles sont les erreurs que tu as ? car si c'est lié ton environement je pense pas qu'une doc pourra t'aider. Le ./install-sh est pourtant assez clair, je n'ai eu aucunes erreurs. :rolleyes:

      Comment


      • #4
        debian ca fait au moin quatre fois que j'installe nagios 2.5 et ya rien qui va pourtant j ai installer nagios3.0 du premier cou et aucune erreur mais la 3.0 n est pas stable, j en ai de la chance lol

        Comment


        • #5
          c'est pas dans l installation le probleme mais c'est quand je vais voir sur l'interface de nagios, il y a une erreur voir plus je sais pas encore.
          alors je fais la commande:
          Code:
          /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/cgi.cfg
          et la il m indique :
          Nagios 2.5
          Copyright (c) 1999-2006 Ethan Galstad (http://www.nagios.org)
          Last Modified: 07-13-2006
          License: GPL

          Reading configuration data...

          Error in configuration file '/usr/local/nagios/etc/cgi.cfg' - Line 24 (UNKNOWN VARIABLE)

          ***> The name of the main configuration file looks suspicious...

          Make sure you are specifying the name of the MAIN configuration file on
          the command line and not the name of another configuration file. The
          main configuration file is typically '/usr/local/nagios/etc/nagios.cfg'

          ***> One or more problems was encountered while processing the config files...

          Check your configuration file(s) to ensure that they contain valid
          directives and data defintions. If you are upgrading from a previous
          version of Nagios, you should be aware that some variables/definitions
          may have been removed or modified in this version. Make sure to read
          the HTML documentation regarding the config files, as well as the
          'Whats New' section to find out what has changed.

          hors ligne 24 de mon cgi.cfg, il y a ecrit:
          physical_html_path=/usr/local/nagios/share
          alors la je comprend plus rien.

          Comment


          • #6
            [edit]
            ce n'est donc pas vraiment une erreur d'installation...Mais plutot de configuration
            Last edited by pymouse; 26 April 2007, 14:52.

            Comment


            • #7
              non ce n est pas j ai carrement cloner mon serveur sur lequel j avais seulement debian et installer nagios2.5

              Comment


              • #8
                C'est possible de voir entierement ton cgi.cfg?

                Comment


                • #9
                  Code:
                   aptitude install nagios2
                  Stable, pas d'erreur..
                  Centreon 2.x

                  Comment


                  • #10
                    Code:
                    #################################################################
                    #
                    # CGI.CFG - Sample CGI Configuration File for Nagios 
                    #
                    # Last Modified: 05-05-2005
                    #
                    #################################################################
                    
                    
                    # MAIN CONFIGURATION FILE
                    # This tells the CGIs where to find your main configuration file.
                    # The CGIs will read the main and host config files for any other
                    # data they might need.
                    
                    cfg_file=/usr/local/nagios/etc/nagios.cfg
                    
                    
                    
                    # PHYSICAL HTML PATH
                    # This is the path where the HTML files for Nagios reside.  This
                    # value is used to locate the logo images needed by the statusmap
                    # and statuswrl CGIs
                    
                    physical_html_path=/usr/local/nagios/share
                    
                    
                    
                    # URL HTML PATH
                    # This is the path portion of the URL that corresponds to the
                    # physical location of the Nagios HTML files (as defined above).
                    # This value is used by the CGIs to locate the online documentation
                    # and graphics.  If you access the Nagios pages with an URL like
                    # http://www.myhost.com/nagios, this value should be '/nagios'
                    # (without the quotes).
                    
                    url_html_path=/nagios
                    
                    
                    
                    # CONTEXT-SENSITIVE HELP
                    # This option determines whether or not a context-sensitive
                    # help icon will be displayed for most of the CGIs.
                    # Values: 0 = disables context-sensitive help
                    #         1 = enables context-sensitive help
                    
                    show_context_help=0
                    
                    
                    
                    # NAGIOS PROCESS CHECK COMMAND
                    # This is the full path and filename of the program used to check
                    # the status of the Nagios process.  It is used only by the CGIs
                    # and is completely optional.  However, if you don't use it, you'll
                    # see warning messages in the CGIs about the Nagios process
                    # not running and you won't be able to execute any commands from
                    # the web interface.  The program should follow the same rules
                    # as plugins; the return codes are the same as for the plugins,
                    # it should have timeout protection, it should output something
                    # to STDIO, etc.
                    #
                    # Note: The command line for the check_nagios plugin below may
                    # have to be tweaked a bit, as different versions of the plugin
                    # use different command line arguments/syntaxes.
                    
                    #nagios_check_command=/usr/local/nagios/libexec/check_nagios /usr/local/nagios/var/status.dat 5 '/usr/local/nagios/bin/nagios'
                    
                    
                    
                    # AUTHENTICATION USAGE
                    # This option controls whether or not the CGIs will use any 
                    # authentication when displaying host and service information, as
                    # well as committing commands to Nagios for processing.  
                    #
                    # Read the HTML documentation to learn how the authorization works!
                    #
                    # NOTE: It is a really *bad* idea to disable authorization, unless
                    # you plan on removing the command CGI (cmd.cgi)!  Failure to do
                    # so will leave you wide open to kiddies messing with Nagios and
                    # possibly hitting you with a denial of service attack by filling up
                    # your drive by continuously writing to your command file!
                    #
                    # Setting this value to 0 will cause the CGIs to *not* use
                    # authentication (bad idea), while any other value will make them
                    # use the authentication functions (the default).
                    
                    use_authentication=1
                    
                    
                    
                    # DEFAULT USER
                    # Setting this variable will define a default user name that can
                    # access pages without authentication.  This allows people within a
                    # secure domain (i.e., behind a firewall) to see the current status
                    # without authenticating.  You may want to use this to avoid basic
                    # authentication if you are not using a sercure server since basic
                    # authentication transmits passwords in the clear.
                    #
                    # Important:  Do not define a default username unless you are
                    # running a secure web server and are sure that everyone who has
                    # access to the CGIs has been authenticated in some manner!  If you
                    # define this variable, anyone who has not authenticated to the web
                    # server will inherit all rights you assign to this user!
                     
                    #default_user_name=guest
                    
                    
                    
                    # SYSTEM/PROCESS INFORMATION ACCESS
                    # This option is a comma-delimited list of all usernames that
                    # have access to viewing the Nagios process information as
                    # provided by the Extended Information CGI (extinfo.cgi).  By
                    # default, *no one* has access to this unless you choose to
                    # not use authorization.  You may use an asterisk (*) to
                    # authorize any user who has authenticated to the web server.
                    
                    #authorized_for_system_information=nagiosadmin,theboss,jdoe
                    
                    
                    
                    # CONFIGURATION INFORMATION ACCESS
                    # This option is a comma-delimited list of all usernames that
                    # can view ALL configuration information (hosts, commands, etc).
                    # By default, users can only view configuration information
                    # for the hosts and services they are contacts for. You may use
                    # an asterisk (*) to authorize any user who has authenticated
                    # to the web server.
                    
                    #authorized_for_configuration_information=nagiosadmin,jdoe
                    
                    
                    
                    # SYSTEM/PROCESS COMMAND ACCESS
                    # This option is a comma-delimited list of all usernames that
                    # can issue shutdown and restart commands to Nagios via the
                    # command CGI (cmd.cgi).  Users in this list can also change
                    # the program mode to active or standby. By default, *no one*
                    # has access to this unless you choose to not use authorization.
                    # You may use an asterisk (*) to authorize any user who has
                    # authenticated to the web server.
                    
                    #authorized_for_system_commands=nagiosadmin
                    
                    
                    
                    # GLOBAL HOST/SERVICE VIEW ACCESS
                    # These two options are comma-delimited lists of all usernames that
                    # can view information for all hosts and services that are being
                    # monitored.  By default, users can only view information
                    # for hosts or services that they are contacts for (unless you
                    # you choose to not use authorization). You may use an asterisk (*)
                    # to authorize any user who has authenticated to the web server.
                    
                    
                    #authorized_for_all_services=nagiosadmin,guest
                    #authorized_for_all_hosts=nagiosadmin,guest
                    
                    
                    
                    # GLOBAL HOST/SERVICE COMMAND ACCESS
                    # These two options are comma-delimited lists of all usernames that
                    # can issue host or service related commands via the command
                    # CGI (cmd.cgi) for all hosts and services that are being monitored. 
                    # By default, users can only issue commands for hosts or services 
                    # that they are contacts for (unless you you choose to not use 
                    # authorization).  You may use an asterisk (*) to authorize any
                    # user who has authenticated to the web server.
                    
                    #authorized_for_all_service_commands=nagiosadmin
                    #authorized_for_all_host_commands=nagiosadmin
                    
                    
                    
                    
                    # STATUSMAP BACKGROUND IMAGE
                    # This option allows you to specify an image to be used as a 
                    # background in the statusmap CGI.  It is assumed that the image
                    # resides in the HTML images path (i.e. /usr/local/nagios/share/images).
                    # This path is automatically determined by appending "/images"
                    # to the path specified by the 'physical_html_path' directive.
                    # Note:  The image file may be in GIF, PNG, JPEG, or GD2 format.
                    # However, I recommend that you convert your image to GD2 format
                    # (uncompressed), as this will cause less CPU load when the CGI
                    # generates the image.
                    
                    #statusmap_background_image=smbackground.gd2
                    
                    
                    
                    # DEFAULT STATUSMAP LAYOUT METHOD
                    # This option allows you to specify the default layout method
                    # the statusmap CGI should use for drawing hosts.  If you do
                    # not use this option, the default is to use user-defined
                    # coordinates.  Valid options are as follows:
                    #	0 = User-defined coordinates
                    #	1 = Depth layers
                    #       2 = Collapsed tree
                    #       3 = Balanced tree
                    #       4 = Circular
                    #       5 = Circular (Marked Up)
                    
                    default_statusmap_layout=5
                    
                    
                    
                    # DEFAULT STATUSWRL LAYOUT METHOD
                    # This option allows you to specify the default layout method
                    # the statuswrl (VRML) CGI should use for drawing hosts.  If you
                    # do not use this option, the default is to use user-defined
                    # coordinates.  Valid options are as follows:
                    #	0 = User-defined coordinates
                    #       2 = Collapsed tree
                    #       3 = Balanced tree
                    #       4 = Circular
                    
                    default_statuswrl_layout=4
                    
                    
                    
                    # STATUSWRL INCLUDE
                    # This option allows you to include your own objects in the 
                    # generated VRML world.  It is assumed that the file
                    # resides in the HTML path (i.e. /usr/local/nagios/share).
                    
                    #statuswrl_include=myworld.wrl
                    
                    
                    
                    # PING SYNTAX
                    # This option determines what syntax should be used when
                    # attempting to ping a host from the WAP interface (using
                    # the statuswml CGI.  You must include the full path to
                    # the ping binary, along with all required options.  The
                    # $HOSTADDRESS$ macro is substituted with the address of
                    # the host before the command is executed.
                    # Please note that the syntax for the ping binary is
                    # notorious for being different on virtually ever *NIX
                    # OS and distribution, so you may have to tweak this to
                    # work on your system.
                    
                    ping_syntax=/bin/ping -n -U -c 5 $HOSTADDRESS$
                    
                    
                    
                    # REFRESH RATE
                    # This option allows you to specify the refresh rate in seconds
                    # of various CGIs (status, statusmap, extinfo, and outages).  
                    
                    refresh_rate=90
                    
                    
                    
                    # SOUND OPTIONS
                    # These options allow you to specify an optional audio file
                    # that should be played in your browser window when there are
                    # problems on the network.  The audio files are used only in
                    # the status CGI.  Only the sound for the most critical problem
                    # will be played.  Order of importance (higher to lower) is as
                    # follows: unreachable hosts, down hosts, critical services,
                    # warning services, and unknown services. If there are no
                    # visible problems, the sound file optionally specified by
                    # 'normal_sound' variable will be played.
                    #
                    #
                    # <varname>=<sound_file>
                    #
                    # Note: All audio files must be placed in the /media subdirectory
                    # under the HTML path (i.e. /usr/local/nagios/share/media/).
                    
                    #host_unreachable_sound=hostdown.wav
                    #host_down_sound=hostdown.wav
                    #service_critical_sound=critical.wav
                    #service_warning_sound=warning.wav
                    #service_unknown_sound=warning.wav
                    #normal_sound=noproblem.wav

                    Comment


                    • #11
                      dans mon cgi.cfg j'ai :

                      main_config_file=/usr/local/nagios/etc/nagios.cfg

                      et non pas

                      cfg_file=/usr/local/nagios/etc/nagios.cfg

                      en vue de l'erreur (UNKNOWN VARIABLE) c'est peut être ca...

                      Comment


                      • #12
                        non c est pas ca, j ai remplacer main_config_file par cfg_file parceque il me donnait deja une erreur pour ca.
                        Mais l erreur se situe sur le nom de physical_html_path

                        Comment


                        • #13
                          je crois bien que j ai trouvé:
                          il me suffit de remplacer partout ou il y a des chemin pour les conf, il suffit que j remplace les noms de variable par cfg_file.
                          Vous trouvez pas ca un peu bizar??
                          merci

                          Comment

                          Working...
                          X